Product Description

FEATURES: Ritver Quick Drying Enamel is based on a special grade Alkyd resin containing anticorrosive pigments. It is used as a top coat for many applications in the industries of steel and other OEM type as well as sign makers especially for protecting the metals and other steel structures against corrosion. Its main advantage lies however lies in the fact that being quick drying and accepts recoat ability. INTENDED USE: • Substrates: Steel furniture, steel frame, steel drum or other metal substrates. • Area of Use: Interiors and Exteriors. TECHNICAL DATA: • Finish :: Smooth/Glossy. (Available in ***** and Matt on request) • Colour:: All colours as per Ritver shade card • Specific gravity :: 1.*1+/-.**5 • Mixed Solids (% by volume) :: *2 +/- 2 • Diluent :: Xylene. • Flash point :: *7?c • Spread Rate: While the spread rate is directly dependant on the surface profile and also the type of undulations it has, as a thumb rule Ritver Quick Drying Enamel would cover *0 – *2 meters per lit. • Drying Time (*0? C) : Set to touch: 1.5 – 2 hours. : Ready for Recoat: app 6 hours. • Recommended DFT : 1 mist coat followed by a good full coat. App *5 - *0 mic. A good surface preparation and following the method statement / recommended system procedure of Ritver is an ideal recommendation for the application of Ritver Quick Drying Enamel. For Metals & Steel Surfaces: Achieve a good and clean surface by removing all contaminants by cleaning & drying. A laitance free surface should be achieved by good sweep blast or a wire brush. Apply one coat of Ritver Quick Drying Primer and proceed after drying Apply one good coat or two nominal coats with a spray or a suitable roller and obtain the desired coverage